SLiME Tire Sealant
is formulated and tested for use in all tube tires. Once installed, SLiME
remains liquid and will not harden or dry out. Slime is guaranteed for 2
years.
As the SLiME
treated tire rotates, centrifugal force pushes the sealant to the tread area
creating a layer of protection, repairing punctures as they occur or treating
existing punctures. SLiME is not intended for use in tires losing pressure from
sidewall punctures, bead leaks, damaged rims or faulty valves. SLiME for tube
type tires is NOT recommended for use in tubeless tires.
· Prevents and repairs punctures up
to1/8” (3mm) using Fibro-Seal™ technology.
· Remains liquid inside the tire,
coating the tread area as the tire rotates.
· Non-toxic, non-hazardous,
non-flammable, non-aerosol and water soluble.
· Tubes treated with SLiME can be
patched with a conventional vulcanized patch using a bit of patience and
care!
· SLiME has a freeze point of
-30ºF (34.4ºC) and a boiling point of 220ºF
(104.4ºC).
What is Fibro-Seal Technology?
SLiME utilizes a state-of-the-art
blend of environmentally friendly fibers, binders, polymers and proprietary
congealing agents which intertwine and clot within the puncture. This Fibro-Seal
lattice, together with the viscous transportation system (the “green” goo) seeks
out and tightly packs itself into the puncture, preventing and repairing flats
with a flexible long lasting plug.
Note: SLiME is not guaranteed to repair
punctures caused by gashes from glass or metal or on punctures greater than 1/8”
(3mm).
Dette produktet ble innført i vår butikk onsdag 12. mars 2008.
Home
Home
