Handlekurv:0 items
Ingen varer

UNIVERSALT

  • Moon™ Lights Starter Kits
    Moon™ Lights Starter Kits
    These compact, chip-on-board L.E.D. lighting kits will help you add sizzle to your bike. Bathe your bike in a warm, steady glow or let the lights dance around in flash mode. Measuring just 1/4" square and 2-1/8" long, the unique chrome case gives you mounting flexibility; they can be mounted on any of three sides to direct the light where you need it most. Their compact size allow you... These compact, chip-on-board L.E.D. lighting kits will help you add sizzle to yo...
  • Snap-N-Go™ Drink Holder with Universal Bracket(ea)
    Snap-N-Go™ Drink Holder with Universal Bracket(ea)
    Even if you're wearing a full set of leathers, you still shouldn't ride with a cup of hot coffee between your legs.  These affordable drink holders mount on either the clutch or brake perch mounts or a 1" bar.  With secure snap-on mounting, simply Snap-N-Go to install or remove.  When removed it leaves an unobtrusive stud on your perch or a small clamp & stud for universal bar... Even if you're wearing a full set of leathers, you still shouldn't ride with a c...
  • Stainless Steel Kuryakyn Travel Mug (ea)
    Stainless Steel Kuryakyn Travel Mug (ea)
    Even if you're wearing a full set of leathers, you still shouldn't ride with a cup of hot coffee between your legs.  These affordable drink holders mount on either the clutch or brake perch mounts or a 1" bar.  With secure snap-on mounting, simply Snap-N-Go to install or remove.  When removed it leaves an unobtrusive stud on your perch or a small clamp & stud for universal bar... Even if you're wearing a full set of leathers, you still shouldn't ride with a c...
  • Peg Adapters for Cruisers & Sport Bikes
    Peg Adapters for Cruisers & Sport Bikes
    Fits: Intruder 1400/ Boulevard S83 95-08 Marauder 800 97-04 Küryakyn Footpegs are a 2-part system for convenience and easy installation. Simply select the footpegs you desire & the appropriate motorcycle specific adapter for your bike. The new serrated adapters bite right into your footpegs for a secure attachment, so make sure they are at the desired angle before tighten them down. This... Fits: Intruder 1400/ Boulevard S83 95-08 Marauder 800 97-04 Küryakyn Footpegs a...
  • Digital Tire Gauge with Hose (ea)
    Digital Tire Gauge with Hose (ea)
    Reads from 2.5 lbs. to 100 lbs in .5 increments. Reads from 2.5 lbs. to 100 lbs in .5 increments. ...
  • L.E.D. Battery Gauge, Chrome (ea)
    L.E.D. Battery Gauge, Chrome (ea)
    Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltage of the bikes electrical system. Green L.E.D.'s represent the normal operating range of your charging system, 12.5v to 14.5v.Amber L.E.D.'s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider of an impending stall or the possibility... Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltag...
  • L.E.D. Battery Gauge, Black (ea)
    L.E.D. Battery Gauge, Black (ea)
    Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltage of the bikes electrical system. Green L.E.D.'s represent the normal operating range of your charging system, 12.5v to 14.5v.Amber L.E.D.'s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider of an impending stall or the possibility... Our L.E.D. Battery Gauge is an array of L.E.D.'s indicating the operating voltag...
  • Triceptor Fender Accent (ea)
    Triceptor Fender Accent (ea)
    You decide where it looks best! Add it as a fender tip & have the cutting edge in fender tips, or move it back & add the perfect chrome accent. With simple peel-&-stick installation this little beauty will class up your front fender & cover unsightly stone chips. Fits: Honda: All VTX1300/1800 Yamaha: All V Star 1300/1100/650, all Road Star, all Roadliner/Stratoliner, & Raider... You decide where it looks best! Add it as a fender tip & have the cutting e...
  • Universal Drink Holders
    Universal Drink Holders
    Fits: Universal for Clutch or Brake Perch Mounting, bolts vertical spacing center to center at 1-1/16" to 1-1/2" apart to accept included m6x1 or 1/4-2" bolts H-D: All '82-'09 H-D Model Clutch or Brake Perch Mounts (ea) Honda: All GL1500/1800 Models, all VTX1300/1800 Models, Shadow 750 Aero, Ace & Spirit, Shadow 1100 Kawasaki: All Vulcan 900 Models, Vulcan 1500/1600 Including... Fits: Universal for Clutch or Brake Perch Mounting, bolts vertical spacing cent...
  • ISO-Grips for GL1800/1500/1200/1100/1000 all years/mod
    ISO-Grips for GL1800/1500/1200/1100/1000 all years/mod
    Combining great style & comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-Pads permit air movement for added comfort in hot weather. The knurled Accent Rings add a touch of class. Combining great style & comfort, these grips provide a soft, non-slip surfac...
  • ISO-Flame Grips for Cruisers
    ISO-Flame Grips for Cruisers
    Our ISO-Flame Grips have a unique flamed pattern in the soft & cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap & trim ring for that additional bad attitude look. This grip accepts our wildly popular ISO-Throttle Boss, which greatly aids your hand on those long rides to the next rally. Fits the following bikes: Yamaha: Road Star (All Models) '99-'09 6261 Road... Our ISO-Flame Grips have a unique flamed pattern in the soft & cushy rubber ...
     KR.700.00KR.809.00 -13%

  • Universal ISO-Grips for 7/8" Handlebars (pr)
    Universal ISO-Grips for 7/8" Handlebars (pr)
    Just about any popular Cruiser can be fit with the incredibly comfortable Küryakyn ISO & ISO-Flame Grips. These grips are available for both 7/8" & 1" bars. The stock throttle sleeve is re-used. An easily cut spacer is included to accommodate bars of differing lengths. Super hi-strength adhesive & easy step-by-step installation instructions are included. Just about any popular Cruiser can be fit with the incredibly comfortable Kürya...
  • ISO-Grips for 1" Handlebars (pr)
    ISO-Grips for 1" Handlebars (pr)
    Just about any popular Cruiser can be fit with the incredibly comfortable Küryakyn ISO & ISO-Flame Grips. These grips are available for both 7/8" & 1" bars. The stock throttle sleeve is re-used. An easily cut spacer is included to accommodate bars of differing lengths. Super hi-strength adhesive & easy step-by-step installation instructions are included. Just about any popular Cruiser can be fit with the incredibly comfortable Kürya...
  • Right Throttle Rocker™
    Right Throttle Rocker™
    The Throttle Rocker attaches to the grip with a Velcro strap & allows you to maintain a steady cruising speed without keeping a tight grip on the throttle. The Throttle Rocker attaches to the grip with a Velcro strap & allows you to...
  • ISO®-Caps with Leather Fringe
    ISO®-Caps with Leather Fringe
    Add a little flair to your ISO-Grips with these top grain leather fringed end caps from Iron Braid. 16" fringe complements fringed saddlebags, levers and jackets. Add a little flair to your ISO-Grips with these top grain leather fringed end ca...
  • One Inch L.E.D. Louver Lights, Blue (pr)
    One Inch L.E.D. Louver Lights, Blue (pr)
    These trick little L.E.D. accent lights will be right at home in several different locations on your bike. The small chrome enclosures resemble louvers found on Hot Rod hoods. They are available in two sizes measuring approximately one inch long containing three L.E.D.s, and approximately two inches long containing seven L.E.D.s. Louver Lights are supplied with connectors that allow you to plug... These trick little L.E.D. accent lights will be right at home in several differe...
  • Two Inch L.E.D. Louver Lights, Blue (ea)
    Two Inch L.E.D. Louver Lights, Blue (ea)
    These trick little L.E.D. accent lights will be right at home in several different locations on your bike. The small chrome enclosures resemble louvers found on Hot Rod hoods. They are available in two sizes measuring approximately one inch long containing three L.E.D.s, and approximately two inches long containing seven L.E.D.s. Louver Lights are supplied with connectors that allow you to plug... These trick little L.E.D. accent lights will be right at home in several differe...
  • Clutch & Brake Lever Pin Helmet Holder without Lock (ea)
    Clutch & Brake Lever Pin Helmet Holder without Lock (ea)
    These helmet pins provide the fastest, easiest way to hang a helmet! Just slide the D-ring over the pin. It's more convenient than resting a helmet on the seat & there's no risk of the helmet falling off & becoming damaged. Available with 10mm thread to screw into right side mirror stud & Models with left mirror stud, or sized to replace clutch or brake lever pins. These helmet pins provide the fastest, easiest way to hang a helmet! Just slide ...
  • Mirror Stud Helmet Holder without Lock (ea)
    Mirror Stud Helmet Holder without Lock (ea)
    These helmet pins provide the fastest, easiest way to hang a helmet! Just slide the D-ring over the pin. It's more convenient than resting a helmet on the seat & there's no risk of the helmet falling off & becoming damaged. Available with 10mm thread to screw into right side mirror stud & Models with left mirror stud, or sized to replace clutch or brake lever pins. These helmet pins provide the fastest, easiest way to hang a helmet! Just slide ...
  • Universal Throttle Boss
    Universal Throttle Boss
    Regardless of what type of bike you ride, the Throttle Boss™ will make riding any distance more comfortable.  Designed to fit any type or size grip, the Throttle Boss™ can be installed in seconds to provide a cushioned "platform" to rest one's palm.  When not in use, it can be quickly removed (without tools) & stowed in a jacket pocket, tool bag, etc. Regardless of what type of bike you ride, the Throttle Boss™ will make riding ...
  • 7/8"/1" P-Clamp, Chrome (ea)
    7/8"/1" P-Clamp, Chrome (ea)
    One slick little clamp, our chrome plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory. The clamp has a 5/16" mounting hole. One slick little clamp, our chrome plated stainless steel P-Clamp has many uses....
  • Trailer Hitch Ball Cover
    Trailer Hitch Ball Cover
    This shining chrome trailer hitch ball cover fits all 1-7/8" and 2" balls. It includes a foam lining to ensure a good fit. This shining chrome trailer hitch ball cover fits all 1-7/8" and 2" ba...
  • Exhaust Extension Beauty Rings Only (pr)
    Exhaust Extension Beauty Rings Only (pr)
    Discontinued Product - All Sales are Final Discontinued Product - All Sales are Final...
  • Four L.E.D. Accent Lights, White
    Four L.E.D. Accent Lights, White
    Use the white lights to illuminate the inside of your saddlebags and trunk or Tour-Pak. The compact chrome housing is 1-1/2" long, 3/4" wide, and 1/2' tall with two screw holes. Each light has two 6" wire leads that can be spliced into any 12v circuit. Use the white lights to illuminate the inside of your saddlebags and trunk or To...
  • Red (ea) Four L.E.D. Accent Lights
    Red (ea) Four L.E.D. Accent Lights
    The colored versions can be used as accent lights or auxiliary turn signals. Use the white lights to illuminate the inside of your saddlebags and trunk or Tour-Pak. The compact chrome housing is 1-1/2" long, 3/4" wide, and 1/2' tall with two screw holes. Each light has two 6" wire leads that can be spliced into any 12v circuit. The colored versions can be used as accent lights or auxiliary turn signals. Use...
  • 2" L.E.D. Louver Lights, Amber (ea)
    2" L.E.D. Louver Lights, Amber (ea)
    These trick little L.E.D. accent lights will be right at home in several different locations on your bike. The small chrome enclosures resemble louvers found on Hot Rod hoods. They are available in two sizes measuring approximately one inch long containing three L.E.D.s, and approximately two inches long containing seven L.E.D.s. Louver Lights are supplied with connectors that allow you to... These trick little L.E.D. accent lights will be right at home in several diff...
  • 1" L.E.D. Louver Lights, Amber (pr)
    1" L.E.D. Louver Lights, Amber (pr)
    These trick little L.E.D. accent lights will be right at home in several different locations on your bike. The small chrome enclosures resemble louvers found on Hot Rod hoods. They are available in two sizes measuring approximately one inch long containing three L.E.D.s, and approximately two inches long containing seven L.E.D.s. Louver Lights are supplied with connectors that allow you to... These trick little L.E.D. accent lights will be right at home in several diff...
  • 1" L.E.D. Louver Lights, Red (pr)
    1" L.E.D. Louver Lights, Red (pr)
    These trick little L.E.D. accent lights will be right at home in several different locations on your bike. The small chrome enclosures resemble louvers found on Hot Rod hoods. They are available in two sizes measuring approximately one inch long containing three L.E.D.s, and approximately two inches long containing seven L.E.D.s. Louver Lights are supplied with connectors that allow you to... These trick little L.E.D. accent lights will be right at home in several diff...
  • 2" L.E.D. Louver Lights, Red (ea)
    2" L.E.D. Louver Lights, Red (ea)
    These trick little L.E.D. accent lights will be right at home in several different locations on your bike. The small chrome enclosures resemble louvers found on Hot Rod hoods. They are available in two sizes measuring approximately one inch long containing three L.E.D.s, and approximately two inches long containing seven L.E.D.s. Louver Lights are supplied with connectors that allow you to... These trick little L.E.D. accent lights will be right at home in several diff...
  • Electrical Power Point
    Electrical Power Point
    Perfect for plugging in your cell phone, iPod, air pump, or any other electrical devices taken on the road. This power point/cigarette lighter will keep them charged. Built into our silver bullet light housing, this beauty mounts on 1" handlebars or on any 1" bar and comes with everything you need to connect directly to your battery with a quick disconnect. Fits: H-D: All '82-'09 H-D... Perfect for plugging in your cell phone, iPod, air pump, or any other electrical...